DIY Floating Shelves

diy floating shelves

After writing my post on mudrooms and sharing my frustration with the lack of organizational space we have, Mr. Nguyen told me to pick a weekend and we would knock out the hall project that I have been wanting to complete for over a year. Not only was I surprised that hubby reads my blog posts, I was thrilled to finally get the project done!

Meet our subject. This is the hall leading to our garage. When we moved in, it had been a narrow linen closet with even narrower floor to ceiling shelving and ugly bi-fold doors. The shelves were too narrow to fit much of anything on, so about a year ago we had the shelving removed and the walls patched up. It remained that way until this past weekend.

hall before

Since the alcove is too narrow for a bench, the plan was to build a couple floating shelves to act as a an area to display some art and also house keys and such.

After, it was decided to make the shelves approximately 10" deep x  3" high, the following items were purchased:  

 (2) 1x3x8 -one for each shelf                                                                                                                                                                        (1) cabinet grade sheet of 1/4" 4x8- for the top, bottom and front piece for both shelves                                                                 (1) pack of 1/4 toggle bolts
(1) can of Rustoleum stain in "Wheat"                                                                                                                                                        (1) Minwax stainable wood filler (Go with the larger size. I bought the smaller container and ended up needing more.)

rustoleum wheat wood stain
minwax stainable wood filler

To make it easier to transport, we had Lowe's cut down the 4x8 sheet into 4 top and bottom panels and 2 fronts which made the installation go quicker. The first step was to create a skeleton for each shelf using the 1x3x8. *Keep in mind when cutting the outward extending pieces to deduct both the depth of the back brace and front panel from your overall length so that you achieve the correct fished shelf depth. Also note, a 1x3 is not really 3" but actually 2.5". 


The skeleton was then bolted to the wall and then the front, bottom, and top panels were nailed on.

I did not bother conditioning the wood before applying the stain. Once, the stain had dried it was a bit too yellow for me. The store had already closed and since I was on a roll, I decided to give Dana's coffee stain technique a try. One thing to note, use caution when brushing the coffee near the walls. Since it is very thin, it got underneath the painter's tape in some areas which I had to then go back and paint over.

It may be hard to tell from the pic, but after three quick coats of coffee the shelves had achieved a warmer tone that I liked. I definitely recommend using coffee as a stain. Not only is it cheap but smells good, as opposed to the toxic fumes that traditional stains have.

Well, there you have it. Now comes the fun part of decorating. If money were no issue I would purchase one of Jai Vasicek Malachi paintings and it would look something like this.

And on the adjoining wall a row of matte black hooks like this one.

matte black wall hooks

 Vasicek has a waiting list for his paintings, if that gives you any indication of the likely hood I would be able to procure one. So, I am thinking about painting an interpretation of his Malachi series. Eek! I will keep you posted if I get the nerve to do it.

Have a good one!